dendrite/syncapi/storage/sqlite3/notification_data_table.go

122 lines
4.3 KiB
Go
Raw Normal View History

Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
// Copyright 2020 The Matrix.org Foundation C.I.C.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package sqlite3
import (
"context"
"database/sql"
"strings"
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
"github.com/matrix-org/dendrite/internal"
"github.com/matrix-org/dendrite/internal/eventutil"
"github.com/matrix-org/dendrite/internal/sqlutil"
"github.com/matrix-org/dendrite/syncapi/storage/tables"
"github.com/matrix-org/dendrite/syncapi/types"
)
func NewSqliteNotificationDataTable(db *sql.DB, streamID *StreamIDStatements) (tables.NotificationData, error) {
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
_, err := db.Exec(notificationDataSchema)
if err != nil {
return nil, err
}
r := &notificationDataStatements{
streamIDStatements: streamID,
db: db,
}
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
return r, sqlutil.StatementList{
{&r.upsertRoomUnreadCounts, upsertRoomUnreadNotificationCountsSQL},
{&r.selectMaxID, selectMaxNotificationIDSQL},
// {&r.selectUserUnreadCountsForRooms, selectUserUnreadNotificationsForRooms}, // used at runtime
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
}.Prepare(db)
}
type notificationDataStatements struct {
db *sql.DB
streamIDStatements *StreamIDStatements
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
upsertRoomUnreadCounts *sql.Stmt
selectMaxID *sql.Stmt
//selectUserUnreadCountsForRooms *sql.Stmt
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
}
const notificationDataSchema = `
CREATE TABLE IF NOT EXISTS syncapi_notification_data (
id INTEGER PRIMARY KEY,
user_id TEXT NOT NULL,
room_id TEXT NOT NULL,
notification_count BIGINT NOT NULL DEFAULT 0,
highlight_count BIGINT NOT NULL DEFAULT 0,
CONSTRAINT syncapi_notifications_unique UNIQUE (user_id, room_id)
);`
const upsertRoomUnreadNotificationCountsSQL = `INSERT INTO syncapi_notification_data
(user_id, room_id, notification_count, highlight_count)
VALUES ($1, $2, $3, $4)
ON CONFLICT (user_id, room_id)
DO UPDATE SET id = $5, notification_count = $6, highlight_count = $7`
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
const selectUserUnreadNotificationsForRooms = `SELECT room_id, notification_count, highlight_count
FROM syncapi_notification_data
WHERE user_id = $1 AND
room_id IN ($2)`
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
const selectMaxNotificationIDSQL = `SELECT CASE COUNT(*) WHEN 0 THEN 0 ELSE MAX(id) END FROM syncapi_notification_data`
2022-09-09 13:06:42 +01:00
func (r *notificationDataStatements) UpsertRoomUnreadCounts(ctx context.Context, txn *sql.Tx, userID, roomID string, notificationCount, highlightCount int) (pos types.StreamPosition, err error) {
pos, err = r.streamIDStatements.nextNotificationID(ctx, nil)
if err != nil {
return
}
_, err = r.upsertRoomUnreadCounts.ExecContext(ctx, userID, roomID, notificationCount, highlightCount, pos, notificationCount, highlightCount)
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
return
}
func (r *notificationDataStatements) SelectUserUnreadCountsForRooms(
ctx context.Context, txn *sql.Tx, userID string, roomIDs []string,
) (map[string]*eventutil.NotificationData, error) {
params := make([]interface{}, len(roomIDs)+1)
params[0] = userID
for i := range roomIDs {
params[i+1] = roomIDs[i]
}
sql := strings.Replace(selectUserUnreadNotificationsForRooms, "($2)", sqlutil.QueryVariadicOffset(len(roomIDs), 1), 1)
rows, err := r.db.QueryContext(ctx, sql, params...)
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
if err != nil {
return nil, err
}
defer internal.CloseAndLogIfError(ctx, rows, "SelectUserUnreadCountsForRooms: rows.close() failed")
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
roomCounts := map[string]*eventutil.NotificationData{}
var roomID string
var notificationCount, highlightCount int
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
for rows.Next() {
if err = rows.Scan(&roomID, &notificationCount, &highlightCount); err != nil {
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
return nil, err
}
roomCounts[roomID] = &eventutil.NotificationData{
RoomID: roomID,
UnreadNotificationCount: notificationCount,
UnreadHighlightCount: highlightCount,
}
}
return roomCounts, rows.Err()
}
2022-09-09 13:06:42 +01:00
func (r *notificationDataStatements) SelectMaxID(ctx context.Context, txn *sql.Tx) (int64, error) {
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
var id int64
2022-09-09 13:06:42 +01:00
err := sqlutil.TxStmt(txn, r.selectMaxID).QueryRowContext(ctx).Scan(&id)
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
return id, err
}