dendrite/clientapi/routing/routing.go

1358 lines
54 KiB
Go
Raw Normal View History

// Copyright 2020 The Matrix.org Foundation C.I.C.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package routing
import (
"context"
"net/http"
"strings"
"github.com/gorilla/mux"
appserviceAPI "github.com/matrix-org/dendrite/appservice/api"
"github.com/matrix-org/dendrite/clientapi/api"
"github.com/matrix-org/dendrite/clientapi/auth"
clientutil "github.com/matrix-org/dendrite/clientapi/httputil"
"github.com/matrix-org/dendrite/clientapi/jsonerror"
"github.com/matrix-org/dendrite/clientapi/producers"
federationAPI "github.com/matrix-org/dendrite/federationapi/api"
"github.com/matrix-org/dendrite/internal/httputil"
"github.com/matrix-org/dendrite/internal/transactions"
keyserverAPI "github.com/matrix-org/dendrite/keyserver/api"
roomserverAPI "github.com/matrix-org/dendrite/roomserver/api"
"github.com/matrix-org/dendrite/setup/config"
"github.com/matrix-org/dendrite/setup/jetstream"
userapi "github.com/matrix-org/dendrite/userapi/api"
"github.com/matrix-org/gomatrixserverlib"
"github.com/matrix-org/util"
"github.com/nats-io/nats.go"
"github.com/prometheus/client_golang/prometheus"
"github.com/sirupsen/logrus"
)
// Setup registers HTTP handlers with the given ServeMux. It also supplies the given http.Client
// to clients which need to make outbound HTTP requests.
//
// Due to Setup being used to call many other functions, a gocyclo nolint is
// applied:
// nolint: gocyclo
func Setup(
publicAPIMux, wkMux, synapseAdminRouter, dendriteAdminRouter *mux.Router,
cfg *config.ClientAPI,
rsAPI roomserverAPI.ClientRoomserverAPI,
asAPI appserviceAPI.AppServiceInternalAPI,
userAPI userapi.ClientUserAPI,
userDirectoryProvider userapi.QuerySearchProfilesAPI,
federation *gomatrixserverlib.FederationClient,
syncProducer *producers.SyncAPIProducer,
transactionsCache *transactions.Cache,
federationSender federationAPI.ClientFederationAPI,
keyAPI keyserverAPI.ClientKeyAPI,
extRoomsProvider api.ExtraPublicRoomsProvider,
mscCfg *config.MSCs, natsClient *nats.Conn,
) {
prometheus.MustRegister(amtRegUsers, sendEventDuration)
rateLimits := httputil.NewRateLimits(&cfg.RateLimiting)
userInteractiveAuth := auth.NewUserInteractive(userAPI, cfg)
unstableFeatures := map[string]bool{
"org.matrix.e2e_cross_signing": true,
}
for _, msc := range cfg.MSCs.MSCs {
unstableFeatures["org.matrix."+msc] = true
}
if cfg.Matrix.WellKnownClientName != "" {
logrus.Infof("Setting m.homeserver base_url as %s at /.well-known/matrix/client", cfg.Matrix.WellKnownClientName)
wkMux.Handle("/client", httputil.MakeExternalAPI("wellknown", func(r *http.Request) util.JSONResponse {
return util.JSONResponse{
Code: http.StatusOK,
JSON: struct {
HomeserverName struct {
BaseUrl string `json:"base_url"`
} `json:"m.homeserver"`
}{
HomeserverName: struct {
BaseUrl string `json:"base_url"`
}{
BaseUrl: cfg.Matrix.WellKnownClientName,
},
},
}
})).Methods(http.MethodGet, http.MethodOptions)
}
publicAPIMux.Handle("/versions",
httputil.MakeExternalAPI("versions", func(req *http.Request) util.JSONResponse {
return util.JSONResponse{
Code: http.StatusOK,
JSON: struct {
Versions []string `json:"versions"`
UnstableFeatures map[string]bool `json:"unstable_features"`
}{Versions: []string{
"r0.0.1",
"r0.1.0",
"r0.2.0",
"r0.3.0",
2020-08-25 15:44:33 +01:00
"r0.4.0",
"r0.5.0",
"r0.6.1",
2022-06-01 09:39:17 +01:00
"v1.0",
"v1.1",
"v1.2",
}, UnstableFeatures: unstableFeatures},
}
}),
).Methods(http.MethodGet, http.MethodOptions)
if cfg.RegistrationSharedSecret != "" {
logrus.Info("Enabling shared secret registration at /_synapse/admin/v1/register")
sr := NewSharedSecretRegistration(cfg.RegistrationSharedSecret)
synapseAdminRouter.Handle("/admin/v1/register",
httputil.MakeExternalAPI("shared_secret_registration", func(req *http.Request) util.JSONResponse {
if req.Method == http.MethodGet {
return util.JSONResponse{
Code: 200,
JSON: struct {
Nonce string `json:"nonce"`
}{
Nonce: sr.GenerateNonce(),
},
}
}
if req.Method == http.MethodPost {
return handleSharedSecretRegistration(userAPI, sr, req)
}
return util.JSONResponse{
Code: http.StatusMethodNotAllowed,
JSON: jsonerror.NotFound("unknown method"),
}
}),
).Methods(http.MethodGet, http.MethodPost, http.MethodOptions)
}
dendriteAdminRouter.Handle("/admin/evacuateRoom/{roomID}",
httputil.MakeAuthAPI("admin_evacuate_room", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return AdminEvacuateRoom(req, device, rsAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
dendriteAdminRouter.Handle("/admin/evacuateUser/{userID}",
httputil.MakeAuthAPI("admin_evacuate_user", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return AdminEvacuateUser(req, device, rsAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
// server notifications
if cfg.Matrix.ServerNotices.Enabled {
logrus.Info("Enabling server notices at /_synapse/admin/v1/send_server_notice")
serverNotificationSender, err := getSenderDevice(context.Background(), userAPI, cfg)
if err != nil {
logrus.WithError(err).Fatal("unable to get account for sending sending server notices")
}
synapseAdminRouter.Handle("/admin/v1/send_server_notice/{txnID}",
httputil.MakeAuthAPI("send_server_notice", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
// not specced, but ensure we're rate limiting requests to this endpoint
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
txnID := vars["txnID"]
return SendServerNotice(
req, &cfg.Matrix.ServerNotices,
cfg, userAPI, rsAPI, asAPI,
device, serverNotificationSender,
&txnID, transactionsCache,
)
}),
).Methods(http.MethodPut, http.MethodOptions)
synapseAdminRouter.Handle("/admin/v1/send_server_notice",
httputil.MakeAuthAPI("send_server_notice", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
// not specced, but ensure we're rate limiting requests to this endpoint
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
return SendServerNotice(
req, &cfg.Matrix.ServerNotices,
cfg, userAPI, rsAPI, asAPI,
device, serverNotificationSender,
nil, transactionsCache,
)
}),
).Methods(http.MethodPost, http.MethodOptions)
}
// You can't just do PathPrefix("/(r0|v3)") because regexps only apply when inside named path variables.
// So make a named path variable called 'apiversion' (which we will never read in handlers) and then do
// (r0|v3) - BUT this is a captured group, which makes no sense because you cannot extract this group
// from a match (gorilla/mux exposes no way to do this) so it demands you make it a non-capturing group
// using ?: so the final regexp becomes what is below. We also need a trailing slash to stop 'v33333' matching.
// Note that 'apiversion' is chosen because it must not collide with a variable used in any of the routing!
v3mux := publicAPIMux.PathPrefix("/{apiversion:(?:r0|v3)}/").Subrouter()
unstableMux := publicAPIMux.PathPrefix("/unstable").Subrouter()
v3mux.Handle("/createRoom",
httputil.MakeAuthAPI("createRoom", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return CreateRoom(req, device, cfg, userAPI, rsAPI, asAPI)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/join/{roomIDOrAlias}",
httputil.MakeAuthAPI(gomatrixserverlib.Join, userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return JoinRoomByIDOrAlias(
req, device, rsAPI, userAPI, vars["roomIDOrAlias"],
)
}),
).Methods(http.MethodPost, http.MethodOptions)
2021-01-22 16:08:47 +00:00
if mscCfg.Enabled("msc2753") {
v3mux.Handle("/peek/{roomIDOrAlias}",
2021-01-22 16:08:47 +00:00
httputil.MakeAuthAPI(gomatrixserverlib.Peek, userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
2021-01-22 16:08:47 +00:00
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return PeekRoomByIDOrAlias(
req, device, rsAPI, vars["roomIDOrAlias"],
2021-01-22 16:08:47 +00:00
)
}),
).Methods(http.MethodPost, http.MethodOptions)
}
v3mux.Handle("/joined_rooms",
httputil.MakeAuthAPI("joined_rooms", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return GetJoinedRooms(req, device, rsAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/join",
httputil.MakeAuthAPI(gomatrixserverlib.Join, userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return JoinRoomByIDOrAlias(
req, device, rsAPI, userAPI, vars["roomID"],
)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/leave",
httputil.MakeAuthAPI("membership", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return LeaveRoomByID(
req, device, rsAPI, vars["roomID"],
)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/unpeek",
httputil.MakeAuthAPI("unpeek", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return UnpeekRoomByID(
req, device, rsAPI, vars["roomID"],
)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/ban",
httputil.MakeAuthAPI("membership", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SendBan(req, userAPI, device, vars["roomID"], cfg, rsAPI, asAPI)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/invite",
httputil.MakeAuthAPI("membership", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SendInvite(req, userAPI, device, vars["roomID"], cfg, rsAPI, asAPI)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/kick",
httputil.MakeAuthAPI("membership", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SendKick(req, userAPI, device, vars["roomID"], cfg, rsAPI, asAPI)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/unban",
httputil.MakeAuthAPI("membership", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SendUnban(req, userAPI, device, vars["roomID"], cfg, rsAPI, asAPI)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/send/{eventType}",
httputil.MakeAuthAPI("send_message", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SendEvent(req, device, vars["roomID"], vars["eventType"], nil, nil, cfg, rsAPI, nil)
2017-09-26 12:55:48 +01:00
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/send/{eventType}/{txnID}",
httputil.MakeAuthAPI("send_message", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
2017-09-26 12:55:48 +01:00
txnID := vars["txnID"]
return SendEvent(req, device, vars["roomID"], vars["eventType"], &txnID,
nil, cfg, rsAPI, transactionsCache)
}),
).Methods(http.MethodPut, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/event/{eventID}",
httputil.MakeAuthAPI("rooms_get_event", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetEvent(req, device, vars["roomID"], vars["eventID"], cfg, rsAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/state", httputil.MakeAuthAPI("room_state", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return OnIncomingStateRequest(req.Context(), device, rsAPI, vars["roomID"])
})).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/aliases", httputil.MakeAuthAPI("aliases", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetAliases(req, rsAPI, device, vars["roomID"])
})).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/state/{type:[^/]+/?}", httputil.MakeAuthAPI("room_state", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
// If there's a trailing slash, remove it
eventType := strings.TrimSuffix(vars["type"], "/")
eventFormat := req.URL.Query().Get("format") == "event"
return OnIncomingStateTypeRequest(req.Context(), device, rsAPI, vars["roomID"], eventType, "", eventFormat)
})).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/state/{type}/{stateKey}", httputil.MakeAuthAPI("room_state", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
eventFormat := req.URL.Query().Get("format") == "event"
return OnIncomingStateTypeRequest(req.Context(), device, rsAPI, vars["roomID"], vars["type"], vars["stateKey"], eventFormat)
})).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/state/{eventType:[^/]+/?}",
httputil.MakeAuthAPI("send_message", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
2017-03-17 11:21:52 +00:00
emptyString := ""
eventType := strings.TrimSuffix(vars["eventType"], "/")
return SendEvent(req, device, vars["roomID"], eventType, nil, &emptyString, cfg, rsAPI, nil)
}),
).Methods(http.MethodPut, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/state/{eventType}/{stateKey}",
httputil.MakeAuthAPI("send_message", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
2017-03-17 11:21:52 +00:00
stateKey := vars["stateKey"]
return SendEvent(req, device, vars["roomID"], vars["eventType"], nil, &stateKey, cfg, rsAPI, nil)
}),
).Methods(http.MethodPut, http.MethodOptions)
v3mux.Handle("/register", httputil.MakeExternalAPI("register", func(req *http.Request) util.JSONResponse {
if r := rateLimits.Limit(req, nil); r != nil {
return *r
}
return Register(req, userAPI, cfg)
})).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/register/available", httputil.MakeExternalAPI("registerAvailable", func(req *http.Request) util.JSONResponse {
if r := rateLimits.Limit(req, nil); r != nil {
return *r
}
return RegisterAvailable(req, cfg, userAPI)
})).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/directory/room/{roomAlias}",
httputil.MakeExternalAPI("directory_room", func(req *http.Request) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return DirectoryRoom(req, vars["roomAlias"], federation, cfg, rsAPI, federationSender)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/directory/room/{roomAlias}",
httputil.MakeAuthAPI("directory_room", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SetLocalAlias(req, device, vars["roomAlias"], cfg, rsAPI)
}),
).Methods(http.MethodPut, http.MethodOptions)
v3mux.Handle("/directory/room/{roomAlias}",
httputil.MakeAuthAPI("directory_room", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return RemoveLocalAlias(req, device, vars["roomAlias"], rsAPI)
}),
).Methods(http.MethodDelete, http.MethodOptions)
v3mux.Handle("/directory/list/room/{roomID}",
httputil.MakeExternalAPI("directory_list", func(req *http.Request) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetVisibility(req, rsAPI, vars["roomID"])
}),
).Methods(http.MethodGet, http.MethodOptions)
// TODO: Add AS support
v3mux.Handle("/directory/list/room/{roomID}",
httputil.MakeAuthAPI("directory_list", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SetVisibility(req, rsAPI, device, vars["roomID"])
}),
).Methods(http.MethodPut, http.MethodOptions)
v3mux.Handle("/publicRooms",
httputil.MakeExternalAPI("public_rooms", func(req *http.Request) util.JSONResponse {
return GetPostPublicRooms(req, rsAPI, extRoomsProvider, federation, cfg)
}),
).Methods(http.MethodGet, http.MethodPost, http.MethodOptions)
v3mux.Handle("/logout",
httputil.MakeAuthAPI("logout", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return Logout(req, userAPI, device)
2017-07-11 16:04:34 +01:00
}),
).Methods(http.MethodPost, http.MethodOptions)
2017-07-11 16:04:34 +01:00
v3mux.Handle("/logout/all",
httputil.MakeAuthAPI("logout", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return LogoutAll(req, userAPI, device)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/typing/{userID}",
httputil.MakeAuthAPI("rooms_typing", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SendTyping(req, device, vars["roomID"], vars["userID"], rsAPI, syncProducer)
}),
).Methods(http.MethodPut, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/redact/{eventID}",
httputil.MakeAuthAPI("rooms_redact", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SendRedaction(req, device, vars["roomID"], vars["eventID"], cfg, rsAPI, nil, nil)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/redact/{eventID}/{txnId}",
httputil.MakeAuthAPI("rooms_redact", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
txnID := vars["txnId"]
return SendRedaction(req, device, vars["roomID"], vars["eventID"], cfg, rsAPI, &txnID, transactionsCache)
}),
).Methods(http.MethodPut, http.MethodOptions)
v3mux.Handle("/sendToDevice/{eventType}/{txnID}",
httputil.MakeAuthAPI("send_to_device", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
Send-to-device support (#1072) * Groundwork for send-to-device messaging * Update sample config * Add unstable routing for now * Send to device consumer in sync API * Start the send-to-device consumer * fix indentation in dendrite-config.yaml * Create send-to-device database tables, other tweaks * Add some logic for send-to-device messages, add them into sync stream * Handle incoming send-to-device messages, count them with EDU stream pos * Undo changes to test * pq.Array * Fix sync * Logging * Fix a couple of transaction things, fix client API * Add send-to-device test, hopefully fix bugs * Comments * Refactor a bit * Fix schema * Fix queries * Debug logging * Fix storing and retrieving of send-to-device messages * Try to avoid database locks * Update sync position * Use latest sync position * Jiggle about sync a bit * Fix tests * Break out the retrieval from the update/delete behaviour * Comments * nolint on getResponseWithPDUsForCompleteSync * Try to line up sync tokens again * Implement wildcard * Add all send-to-device tests to whitelist, what could possibly go wrong? * Only care about wildcard when targeted locally * Deduplicate transactions * Handle tokens properly, return immediately if waiting send-to-device messages * Fix sync * Update sytest-whitelist * Fix copyright notice (need to do more of this) * Comments, copyrights * Return errors from Do, fix dendritejs * Review comments * Comments * Constructor for TransactionWriter * defletions * Update gomatrixserverlib, sytest-blacklist
2020-06-01 17:50:19 +01:00
if err != nil {
return util.ErrorResponse(err)
}
txnID := vars["txnID"]
return SendToDevice(req, device, syncProducer, transactionsCache, vars["eventType"], &txnID)
Send-to-device support (#1072) * Groundwork for send-to-device messaging * Update sample config * Add unstable routing for now * Send to device consumer in sync API * Start the send-to-device consumer * fix indentation in dendrite-config.yaml * Create send-to-device database tables, other tweaks * Add some logic for send-to-device messages, add them into sync stream * Handle incoming send-to-device messages, count them with EDU stream pos * Undo changes to test * pq.Array * Fix sync * Logging * Fix a couple of transaction things, fix client API * Add send-to-device test, hopefully fix bugs * Comments * Refactor a bit * Fix schema * Fix queries * Debug logging * Fix storing and retrieving of send-to-device messages * Try to avoid database locks * Update sync position * Use latest sync position * Jiggle about sync a bit * Fix tests * Break out the retrieval from the update/delete behaviour * Comments * nolint on getResponseWithPDUsForCompleteSync * Try to line up sync tokens again * Implement wildcard * Add all send-to-device tests to whitelist, what could possibly go wrong? * Only care about wildcard when targeted locally * Deduplicate transactions * Handle tokens properly, return immediately if waiting send-to-device messages * Fix sync * Update sytest-whitelist * Fix copyright notice (need to do more of this) * Comments, copyrights * Return errors from Do, fix dendritejs * Review comments * Comments * Constructor for TransactionWriter * defletions * Update gomatrixserverlib, sytest-blacklist
2020-06-01 17:50:19 +01:00
}),
).Methods(http.MethodPut, http.MethodOptions)
// This is only here because sytest refers to /unstable for this endpoint
// rather than r0. It's an exact duplicate of the above handler.
// TODO: Remove this if/when sytest is fixed!
unstableMux.Handle("/sendToDevice/{eventType}/{txnID}",
httputil.MakeAuthAPI("send_to_device", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
Send-to-device support (#1072) * Groundwork for send-to-device messaging * Update sample config * Add unstable routing for now * Send to device consumer in sync API * Start the send-to-device consumer * fix indentation in dendrite-config.yaml * Create send-to-device database tables, other tweaks * Add some logic for send-to-device messages, add them into sync stream * Handle incoming send-to-device messages, count them with EDU stream pos * Undo changes to test * pq.Array * Fix sync * Logging * Fix a couple of transaction things, fix client API * Add send-to-device test, hopefully fix bugs * Comments * Refactor a bit * Fix schema * Fix queries * Debug logging * Fix storing and retrieving of send-to-device messages * Try to avoid database locks * Update sync position * Use latest sync position * Jiggle about sync a bit * Fix tests * Break out the retrieval from the update/delete behaviour * Comments * nolint on getResponseWithPDUsForCompleteSync * Try to line up sync tokens again * Implement wildcard * Add all send-to-device tests to whitelist, what could possibly go wrong? * Only care about wildcard when targeted locally * Deduplicate transactions * Handle tokens properly, return immediately if waiting send-to-device messages * Fix sync * Update sytest-whitelist * Fix copyright notice (need to do more of this) * Comments, copyrights * Return errors from Do, fix dendritejs * Review comments * Comments * Constructor for TransactionWriter * defletions * Update gomatrixserverlib, sytest-blacklist
2020-06-01 17:50:19 +01:00
if err != nil {
return util.ErrorResponse(err)
}
txnID := vars["txnID"]
return SendToDevice(req, device, syncProducer, transactionsCache, vars["eventType"], &txnID)
Send-to-device support (#1072) * Groundwork for send-to-device messaging * Update sample config * Add unstable routing for now * Send to device consumer in sync API * Start the send-to-device consumer * fix indentation in dendrite-config.yaml * Create send-to-device database tables, other tweaks * Add some logic for send-to-device messages, add them into sync stream * Handle incoming send-to-device messages, count them with EDU stream pos * Undo changes to test * pq.Array * Fix sync * Logging * Fix a couple of transaction things, fix client API * Add send-to-device test, hopefully fix bugs * Comments * Refactor a bit * Fix schema * Fix queries * Debug logging * Fix storing and retrieving of send-to-device messages * Try to avoid database locks * Update sync position * Use latest sync position * Jiggle about sync a bit * Fix tests * Break out the retrieval from the update/delete behaviour * Comments * nolint on getResponseWithPDUsForCompleteSync * Try to line up sync tokens again * Implement wildcard * Add all send-to-device tests to whitelist, what could possibly go wrong? * Only care about wildcard when targeted locally * Deduplicate transactions * Handle tokens properly, return immediately if waiting send-to-device messages * Fix sync * Update sytest-whitelist * Fix copyright notice (need to do more of this) * Comments, copyrights * Return errors from Do, fix dendritejs * Review comments * Comments * Constructor for TransactionWriter * defletions * Update gomatrixserverlib, sytest-blacklist
2020-06-01 17:50:19 +01:00
}),
).Methods(http.MethodPut, http.MethodOptions)
v3mux.Handle("/account/whoami",
httputil.MakeAuthAPI("whoami", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
return Whoami(req, device)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/account/password",
httputil.MakeAuthAPI("password", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
return Password(req, userAPI, device, cfg)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/account/deactivate",
httputil.MakeAuthAPI("deactivate", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
return Deactivate(req, userInteractiveAuth, userAPI, device)
}),
).Methods(http.MethodPost, http.MethodOptions)
// Stub endpoints required by Element
v3mux.Handle("/login",
httputil.MakeExternalAPI("login", func(req *http.Request) util.JSONResponse {
if r := rateLimits.Limit(req, nil); r != nil {
return *r
}
return Login(req, userAPI, cfg)
}),
).Methods(http.MethodGet, http.MethodPost, http.MethodOptions)
v3mux.Handle("/auth/{authType}/fallback/web",
httputil.MakeHTMLAPI("auth_fallback", func(w http.ResponseWriter, req *http.Request) *util.JSONResponse {
vars := mux.Vars(req)
return AuthFallback(w, req, vars["authType"], cfg)
}),
).Methods(http.MethodGet, http.MethodPost, http.MethodOptions)
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
// Push rules
v3mux.Handle("/pushrules",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return util.JSONResponse{
Code: http.StatusBadRequest,
JSON: jsonerror.InvalidArgumentValue("missing trailing slash"),
}
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/pushrules/",
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return GetAllPushRules(req.Context(), device, userAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/pushrules/",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return util.JSONResponse{
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
Code: http.StatusBadRequest,
JSON: jsonerror.InvalidArgumentValue("scope, kind and rule ID must be specified"),
}
}),
).Methods(http.MethodPut)
v3mux.Handle("/pushrules/{scope}/",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetPushRulesByScope(req.Context(), vars["scope"], device, userAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/pushrules/{scope}",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return util.JSONResponse{
Code: http.StatusBadRequest,
JSON: jsonerror.InvalidArgumentValue("missing trailing slash after scope"),
}
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/pushrules/{scope:[^/]+/?}",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return util.JSONResponse{
Code: http.StatusBadRequest,
JSON: jsonerror.InvalidArgumentValue("kind and rule ID must be specified"),
}
}),
).Methods(http.MethodPut)
v3mux.Handle("/pushrules/{scope}/{kind}/",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetPushRulesByKind(req.Context(), vars["scope"], vars["kind"], device, userAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/pushrules/{scope}/{kind}",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return util.JSONResponse{
Code: http.StatusBadRequest,
JSON: jsonerror.InvalidArgumentValue("missing trailing slash after kind"),
}
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/pushrules/{scope}/{kind:[^/]+/?}",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return util.JSONResponse{
Code: http.StatusBadRequest,
JSON: jsonerror.InvalidArgumentValue("rule ID must be specified"),
}
}),
).Methods(http.MethodPut)
v3mux.Handle("/pushrules/{scope}/{kind}/{ruleID}",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
return GetPushRuleByRuleID(req.Context(), vars["scope"], vars["kind"], vars["ruleID"], device, userAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
v3mux.Handle("/pushrules/{scope}/{kind}/{ruleID}",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
query := req.URL.Query()
return PutPushRuleByRuleID(req.Context(), vars["scope"], vars["kind"], vars["ruleID"], query.Get("after"), query.Get("before"), req.Body, device, userAPI)
}),
).Methods(http.MethodPut)
v3mux.Handle("/pushrules/{scope}/{kind}/{ruleID}",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return DeletePushRuleByRuleID(req.Context(), vars["scope"], vars["kind"], vars["ruleID"], device, userAPI)
}),
).Methods(http.MethodDelete)
v3mux.Handle("/pushrules/{scope}/{kind}/{ruleID}/{attr}",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetPushRuleAttrByRuleID(req.Context(), vars["scope"], vars["kind"], vars["ruleID"], vars["attr"], device, userAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/pushrules/{scope}/{kind}/{ruleID}/{attr}",
httputil.MakeAuthAPI("push_rules", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return PutPushRuleAttrByRuleID(req.Context(), vars["scope"], vars["kind"], vars["ruleID"], vars["attr"], req.Body, device, userAPI)
}),
).Methods(http.MethodPut)
// Element user settings
v3mux.Handle("/profile/{userID}",
httputil.MakeExternalAPI("profile", func(req *http.Request) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetProfile(req, userAPI, cfg, vars["userID"], asAPI, federation)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/profile/{userID}/avatar_url",
httputil.MakeExternalAPI("profile_avatar_url", func(req *http.Request) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetAvatarURL(req, userAPI, cfg, vars["userID"], asAPI, federation)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/profile/{userID}/avatar_url",
httputil.MakeAuthAPI("profile_avatar_url", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SetAvatarURL(req, userAPI, device, vars["userID"], cfg, rsAPI)
}),
).Methods(http.MethodPut, http.MethodOptions)
// Browsers use the OPTIONS HTTP method to check if the CORS policy allows
// PUT requests, so we need to allow this method
v3mux.Handle("/profile/{userID}/displayname",
httputil.MakeExternalAPI("profile_displayname", func(req *http.Request) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetDisplayName(req, userAPI, cfg, vars["userID"], asAPI, federation)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/profile/{userID}/displayname",
httputil.MakeAuthAPI("profile_displayname", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SetDisplayName(req, userAPI, device, vars["userID"], cfg, rsAPI)
}),
).Methods(http.MethodPut, http.MethodOptions)
// Browsers use the OPTIONS HTTP method to check if the CORS policy allows
// PUT requests, so we need to allow this method
v3mux.Handle("/account/3pid",
httputil.MakeAuthAPI("account_3pid", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return GetAssociated3PIDs(req, userAPI, device)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/account/3pid",
httputil.MakeAuthAPI("account_3pid", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return CheckAndSave3PIDAssociation(req, userAPI, device, cfg)
}),
).Methods(http.MethodPost, http.MethodOptions)
unstableMux.Handle("/account/3pid/delete",
httputil.MakeAuthAPI("account_3pid", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return Forget3PID(req, userAPI)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/{path:(?:account/3pid|register)}/email/requestToken",
httputil.MakeExternalAPI("account_3pid_request_token", func(req *http.Request) util.JSONResponse {
return RequestEmailToken(req, userAPI, cfg)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/voip/turnServer",
httputil.MakeAuthAPI("turn_server", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
return RequestTurnServer(req, device, cfg)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/thirdparty/protocols",
httputil.MakeExternalAPI("thirdparty_protocols", func(req *http.Request) util.JSONResponse {
// TODO: Return the third party protcols
return util.JSONResponse{
Code: http.StatusOK,
JSON: struct{}{},
}
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/initialSync",
httputil.MakeExternalAPI("rooms_initial_sync", func(req *http.Request) util.JSONResponse {
// TODO: Allow people to peek into rooms.
return util.JSONResponse{
Code: http.StatusForbidden,
JSON: jsonerror.GuestAccessForbidden("Guest access not implemented"),
}
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/user/{userID}/account_data/{type}",
httputil.MakeAuthAPI("user_account_data", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SaveAccountData(req, userAPI, device, vars["userID"], "", vars["type"], syncProducer)
}),
).Methods(http.MethodPut, http.MethodOptions)
v3mux.Handle("/user/{userID}/rooms/{roomID}/account_data/{type}",
httputil.MakeAuthAPI("user_account_data", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SaveAccountData(req, userAPI, device, vars["userID"], vars["roomID"], vars["type"], syncProducer)
}),
).Methods(http.MethodPut, http.MethodOptions)
v3mux.Handle("/user/{userID}/account_data/{type}",
httputil.MakeAuthAPI("user_account_data", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetAccountData(req, userAPI, device, vars["userID"], "", vars["type"])
}),
).Methods(http.MethodGet)
v3mux.Handle("/user/{userID}/rooms/{roomID}/account_data/{type}",
httputil.MakeAuthAPI("user_account_data", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetAccountData(req, userAPI, device, vars["userID"], vars["roomID"], vars["type"])
}),
).Methods(http.MethodGet)
v3mux.Handle("/admin/whois/{userID}",
httputil.MakeAuthAPI("admin_whois", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetAdminWhois(req, userAPI, device, vars["userID"])
}),
).Methods(http.MethodGet)
v3mux.Handle("/user/{userID}/openid/request_token",
httputil.MakeAuthAPI("openid_request_token", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return CreateOpenIDToken(req, userAPI, device, vars["userID"], cfg)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/user_directory/search",
httputil.MakeAuthAPI("userdirectory_search", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
postContent := struct {
SearchString string `json:"search_term"`
Limit int `json:"limit"`
}{}
if resErr := clientutil.UnmarshalJSONRequest(req, &postContent); resErr != nil {
return *resErr
}
return SearchUserDirectory(
req.Context(),
device,
userAPI,
rsAPI,
userDirectoryProvider,
cfg.Matrix.ServerName,
postContent.SearchString,
postContent.Limit,
)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/members",
httputil.MakeAuthAPI("rooms_members", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetMemberships(req, device, vars["roomID"], false, cfg, rsAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/joined_members",
httputil.MakeAuthAPI("rooms_members", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetMemberships(req, device, vars["roomID"], true, cfg, rsAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/read_markers",
httputil.MakeAuthAPI("rooms_read_markers", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SaveReadMarker(req, userAPI, rsAPI, syncProducer, device, vars["roomID"])
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/forget",
httputil.MakeAuthAPI("rooms_forget", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SendForget(req, device, vars["roomID"], rsAPI)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomID}/upgrade",
httputil.MakeAuthAPI("rooms_upgrade", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return UpgradeRoom(req, device, cfg, vars["roomID"], userAPI, rsAPI, asAPI)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/devices",
httputil.MakeAuthAPI("get_devices", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return GetDevicesByLocalpart(req, userAPI, device)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/devices/{deviceID}",
httputil.MakeAuthAPI("get_device", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetDeviceByID(req, userAPI, device, vars["deviceID"])
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/devices/{deviceID}",
httputil.MakeAuthAPI("device_data", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return UpdateDeviceByID(req, userAPI, device, vars["deviceID"])
2017-11-14 09:59:02 +00:00
}),
).Methods(http.MethodPut, http.MethodOptions)
2017-11-14 09:59:02 +00:00
v3mux.Handle("/devices/{deviceID}",
httputil.MakeAuthAPI("delete_device", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return DeleteDeviceById(req, userInteractiveAuth, userAPI, device, vars["deviceID"])
}),
).Methods(http.MethodDelete, http.MethodOptions)
v3mux.Handle("/delete_devices",
httputil.MakeAuthAPI("delete_devices", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return DeleteDevices(req, userAPI, device)
}),
).Methods(http.MethodPost, http.MethodOptions)
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
v3mux.Handle("/notifications",
httputil.MakeAuthAPI("get_notifications", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return GetNotifications(req, device, userAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/pushers",
httputil.MakeAuthAPI("get_pushers", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return GetPushers(req, device, userAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/pushers/set",
httputil.MakeAuthAPI("set_pushers", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
Implement Push Notifications (#1842) * Add Pushserver component with Pushers API Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Dan Peleg <dan@globekeeper.com> * Wire Pushserver component Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com> * Add PushGatewayClient. The full event format is required for Sytest. * Add a pushrules module. * Change user API account creation to use the new pushrules module's defaults. Introduces "scope" as required by client API, and some small field tweaks to make some 61push Sytests pass. * Add push rules query/put API in Pushserver. This manipulates account data over User API, and fires sync messages for changes. Those sync messages should, according to an existing TODO in clientapi, be moved to userapi. Forks clientapi/producers/syncapi.go to pushserver/ for later extension. * Add clientapi routes for push rules to Pushserver. A cleanup would be to move more of the name-splitting logic into pushrules.go, to depollute routing.go. * Output rooms.join.unread_notifications in /sync. This is the read-side. Pushserver will be the write-side. * Implement pushserver/storage for notifications. * Use PushGatewayClient and the pushrules module in Pushserver's room consumer. * Use one goroutine per user to avoid locking up the entire server for one bad push gateway. * Split pushing by format. * Send one device per push. Sytest does not support coalescing multiple devices into one push. Matches Synapse. Either we change Sytest, or remove the group-by-url-and-format logic. * Write OutputNotificationData from push server. Sync API is already the consumer. * Implement read receipt consumers in Pushserver. Supports m.read and m.fully_read receipts. * Add clientapi route for /unstable/notifications. * Rename to UpsertPusher for clarity and handle pusher update * Fix linter errors * Ignore body.Close() error check * Fix push server internal http wiring * Add 40 newly passing 61push tests to whitelist * Add next 12 newly passing 61push tests to whitelist * Send notification data before notifying users in EDU server consumer * NATS JetStream * Goodbye sarama * Fix `NewStreamTokenFromString` * Consume on the correct topic for the roomserver * Don't panic, NAK instead * Move push notifications into the User API * Don't set null values since that apparently causes Element upsetti * Also set omitempty on conditions * Fix bug so that we don't override the push rules unnecessarily * Tweak defaults * Update defaults * More tweaks * Move `/notifications` onto `r0`/`v3` mux * User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly Co-authored-by: Piotr Kozimor <p1996k@gmail.com> Co-authored-by: Tommie Gannert <tommie@gannert.se> Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2022-03-03 11:40:53 +00:00
return *r
}
return SetPusher(req, device, userAPI)
}),
).Methods(http.MethodPost, http.MethodOptions)
2017-09-22 17:28:29 +01:00
// Stub implementations for sytest
v3mux.Handle("/events",
httputil.MakeExternalAPI("events", func(req *http.Request) util.JSONResponse {
return util.JSONResponse{Code: http.StatusOK, JSON: map[string]interface{}{
2017-09-22 17:28:29 +01:00
"chunk": []interface{}{},
"start": "",
"end": "",
}}
}),
).Methods(http.MethodGet, http.MethodOptions)
2017-09-22 17:28:29 +01:00
v3mux.Handle("/initialSync",
httputil.MakeExternalAPI("initial_sync", func(req *http.Request) util.JSONResponse {
return util.JSONResponse{Code: http.StatusOK, JSON: map[string]interface{}{
2017-09-22 17:28:29 +01:00
"end": "",
}}
}),
).Methods(http.MethodGet, http.MethodOptions)
2019-08-02 12:17:51 +01:00
v3mux.Handle("/user/{userId}/rooms/{roomId}/tags",
httputil.MakeAuthAPI("get_tags", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
2019-08-02 12:17:51 +01:00
if err != nil {
return util.ErrorResponse(err)
}
return GetTags(req, userAPI, device, vars["userId"], vars["roomId"], syncProducer)
2019-08-02 12:17:51 +01:00
}),
).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/user/{userId}/rooms/{roomId}/tags/{tag}",
httputil.MakeAuthAPI("put_tag", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
2019-08-02 12:17:51 +01:00
if err != nil {
return util.ErrorResponse(err)
}
return PutTag(req, userAPI, device, vars["userId"], vars["roomId"], vars["tag"], syncProducer)
2019-08-02 12:17:51 +01:00
}),
).Methods(http.MethodPut, http.MethodOptions)
v3mux.Handle("/user/{userId}/rooms/{roomId}/tags/{tag}",
httputil.MakeAuthAPI("delete_tag", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
2019-08-02 12:17:51 +01:00
if err != nil {
return util.ErrorResponse(err)
}
return DeleteTag(req, userAPI, device, vars["userId"], vars["roomId"], vars["tag"], syncProducer)
2019-08-02 12:17:51 +01:00
}),
).Methods(http.MethodDelete, http.MethodOptions)
v3mux.Handle("/capabilities",
httputil.MakeAuthAPI("capabilities", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
return *r
}
return GetCapabilities(req, rsAPI)
}),
).Methods(http.MethodGet, http.MethodOptions)
// Key Backup Versions (Metadata)
getBackupKeysVersion := httputil.MakeAuthAPI("get_backup_keys_version", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return KeyBackupVersion(req, userAPI, device, vars["version"])
})
getLatestBackupKeysVersion := httputil.MakeAuthAPI("get_latest_backup_keys_version", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return KeyBackupVersion(req, userAPI, device, "")
})
putBackupKeysVersion := httputil.MakeAuthAPI("put_backup_keys_version", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return ModifyKeyBackupVersionAuthData(req, userAPI, device, vars["version"])
})
deleteBackupKeysVersion := httputil.MakeAuthAPI("delete_backup_keys_version", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return DeleteKeyBackupVersion(req, userAPI, device, vars["version"])
})
postNewBackupKeysVersion := httputil.MakeAuthAPI("post_new_backup_keys_version", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return CreateKeyBackupVersion(req, userAPI, device)
})
v3mux.Handle("/room_keys/version/{version}", getBackupKeysVersion).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/room_keys/version", getLatestBackupKeysVersion).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/room_keys/version/{version}", putBackupKeysVersion).Methods(http.MethodPut)
v3mux.Handle("/room_keys/version/{version}", deleteBackupKeysVersion).Methods(http.MethodDelete)
v3mux.Handle("/room_keys/version", postNewBackupKeysVersion).Methods(http.MethodPost, http.MethodOptions)
unstableMux.Handle("/room_keys/version/{version}", getBackupKeysVersion).Methods(http.MethodGet, http.MethodOptions)
unstableMux.Handle("/room_keys/version", getLatestBackupKeysVersion).Methods(http.MethodGet, http.MethodOptions)
unstableMux.Handle("/room_keys/version/{version}", putBackupKeysVersion).Methods(http.MethodPut)
unstableMux.Handle("/room_keys/version/{version}", deleteBackupKeysVersion).Methods(http.MethodDelete)
unstableMux.Handle("/room_keys/version", postNewBackupKeysVersion).Methods(http.MethodPost, http.MethodOptions)
// Inserting E2E Backup Keys
// Bulk room and session
putBackupKeys := httputil.MakeAuthAPI("put_backup_keys", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
version := req.URL.Query().Get("version")
if version == "" {
return util.JSONResponse{
Code: 400,
JSON: jsonerror.InvalidArgumentValue("version must be specified"),
}
}
var reqBody keyBackupSessionRequest
resErr := clientutil.UnmarshalJSONRequest(req, &reqBody)
if resErr != nil {
return *resErr
}
return UploadBackupKeys(req, userAPI, device, version, &reqBody)
})
// Single room bulk session
putBackupKeysRoom := httputil.MakeAuthAPI("put_backup_keys_room", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
version := req.URL.Query().Get("version")
if version == "" {
return util.JSONResponse{
Code: 400,
JSON: jsonerror.InvalidArgumentValue("version must be specified"),
}
}
roomID := vars["roomID"]
var reqBody keyBackupSessionRequest
reqBody.Rooms = make(map[string]struct {
Sessions map[string]userapi.KeyBackupSession `json:"sessions"`
})
reqBody.Rooms[roomID] = struct {
Sessions map[string]userapi.KeyBackupSession `json:"sessions"`
}{
Sessions: map[string]userapi.KeyBackupSession{},
}
body := reqBody.Rooms[roomID]
resErr := clientutil.UnmarshalJSONRequest(req, &body)
if resErr != nil {
return *resErr
}
reqBody.Rooms[roomID] = body
return UploadBackupKeys(req, userAPI, device, version, &reqBody)
})
// Single room, single session
putBackupKeysRoomSession := httputil.MakeAuthAPI("put_backup_keys_room_session", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
version := req.URL.Query().Get("version")
if version == "" {
return util.JSONResponse{
Code: 400,
JSON: jsonerror.InvalidArgumentValue("version must be specified"),
}
}
var reqBody userapi.KeyBackupSession
resErr := clientutil.UnmarshalJSONRequest(req, &reqBody)
if resErr != nil {
return *resErr
}
roomID := vars["roomID"]
sessionID := vars["sessionID"]
var keyReq keyBackupSessionRequest
keyReq.Rooms = make(map[string]struct {
Sessions map[string]userapi.KeyBackupSession `json:"sessions"`
})
keyReq.Rooms[roomID] = struct {
Sessions map[string]userapi.KeyBackupSession `json:"sessions"`
}{
Sessions: make(map[string]userapi.KeyBackupSession),
}
keyReq.Rooms[roomID].Sessions[sessionID] = reqBody
return UploadBackupKeys(req, userAPI, device, version, &keyReq)
})
v3mux.Handle("/room_keys/keys", putBackupKeys).Methods(http.MethodPut)
v3mux.Handle("/room_keys/keys/{roomID}", putBackupKeysRoom).Methods(http.MethodPut)
v3mux.Handle("/room_keys/keys/{roomID}/{sessionID}", putBackupKeysRoomSession).Methods(http.MethodPut)
unstableMux.Handle("/room_keys/keys", putBackupKeys).Methods(http.MethodPut)
unstableMux.Handle("/room_keys/keys/{roomID}", putBackupKeysRoom).Methods(http.MethodPut)
unstableMux.Handle("/room_keys/keys/{roomID}/{sessionID}", putBackupKeysRoomSession).Methods(http.MethodPut)
// Querying E2E Backup Keys
getBackupKeys := httputil.MakeAuthAPI("get_backup_keys", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return GetBackupKeys(req, userAPI, device, req.URL.Query().Get("version"), "", "")
})
getBackupKeysRoom := httputil.MakeAuthAPI("get_backup_keys_room", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetBackupKeys(req, userAPI, device, req.URL.Query().Get("version"), vars["roomID"], "")
})
getBackupKeysRoomSession := httputil.MakeAuthAPI("get_backup_keys_room_session", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetBackupKeys(req, userAPI, device, req.URL.Query().Get("version"), vars["roomID"], vars["sessionID"])
})
v3mux.Handle("/room_keys/keys", getBackupKeys).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/room_keys/keys/{roomID}", getBackupKeysRoom).Methods(http.MethodGet, http.MethodOptions)
v3mux.Handle("/room_keys/keys/{roomID}/{sessionID}", getBackupKeysRoomSession).Methods(http.MethodGet, http.MethodOptions)
unstableMux.Handle("/room_keys/keys", getBackupKeys).Methods(http.MethodGet, http.MethodOptions)
unstableMux.Handle("/room_keys/keys/{roomID}", getBackupKeysRoom).Methods(http.MethodGet, http.MethodOptions)
unstableMux.Handle("/room_keys/keys/{roomID}/{sessionID}", getBackupKeysRoomSession).Methods(http.MethodGet, http.MethodOptions)
// Deleting E2E Backup Keys
// Cross-signing device keys
postDeviceSigningKeys := httputil.MakeAuthAPI("post_device_signing_keys", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return UploadCrossSigningDeviceKeys(req, userInteractiveAuth, keyAPI, device, userAPI, cfg)
})
postDeviceSigningSignatures := httputil.MakeAuthAPI("post_device_signing_signatures", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return UploadCrossSigningDeviceSignatures(req, keyAPI, device)
})
v3mux.Handle("/keys/device_signing/upload", postDeviceSigningKeys).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/keys/signatures/upload", postDeviceSigningSignatures).Methods(http.MethodPost, http.MethodOptions)
unstableMux.Handle("/keys/device_signing/upload", postDeviceSigningKeys).Methods(http.MethodPost, http.MethodOptions)
unstableMux.Handle("/keys/signatures/upload", postDeviceSigningSignatures).Methods(http.MethodPost, http.MethodOptions)
// Supplying a device ID is deprecated.
v3mux.Handle("/keys/upload/{deviceID}",
httputil.MakeAuthAPI("keys_upload", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return UploadKeys(req, keyAPI, device)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/keys/upload",
httputil.MakeAuthAPI("keys_upload", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return UploadKeys(req, keyAPI, device)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/keys/query",
httputil.MakeAuthAPI("keys_query", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return QueryKeys(req, keyAPI, device)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/keys/claim",
httputil.MakeAuthAPI("keys_claim", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
return ClaimKeys(req, keyAPI)
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/rooms/{roomId}/receipt/{receiptType}/{eventId}",
Implement read receipts (#1528) * fix conversion from int to string yields a string of one rune, not a string of digits * Add receipts table to syncapi * Use StreamingToken as the since value * Add required method to testEDUProducer * Make receipt json creation "easier" to read * Add receipts api to the eduserver * Add receipts endpoint * Add eduserver kafka consumer * Add missing kafka config * Add passing tests to whitelist Signed-off-by: Till Faelligen <tfaelligen@gmail.com> * Fix copy & paste error * Fix column count error * Make outbound federation receipts pass * Make "Inbound federation rejects receipts from wrong remote" pass * Don't use errors package * - Add TODO for batching requests - Rename variable * Return a better error message * - Use OutputReceiptEvent instead of InputReceiptEvent as result - Don't use the errors package for errors - Defer CloseAndLogIfError to close rows - Fix Copyright * Better creation/usage of JoinResponse * Query all joined rooms instead of just one * Update gomatrixserverlib * Add sqlite3 migration * Add postgres migration * Ensure required sequence exists before running migrations * Clarification on comment * - Fix a bug when creating client receipts - Use concrete types instead of interface{} * Remove dead code Use key for timestamp * Fix postgres query... * Remove single purpose struct * Use key/value directly * Only apply receipts on initial sync or if edu positions differ, otherwise we'll be sending the same receipts over and over again. * Actually update the id, so it is correctly send in syncs * Set receipt on request to /read_markers * Fix issue with receipts getting overwritten * Use fmt.Errorf instead of pkg/errors * Revert "Add postgres migration" This reverts commit 722fe5a04628882b787d096942459961db159b06. * Revert "Add sqlite3 migration" This reverts commit d113b03f6495a4b8f8bcf158a3d00b510b4240cc. * Fix selectRoomReceipts query * Make golangci-lint happy Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-11-09 18:46:11 +00:00
httputil.MakeAuthAPI(gomatrixserverlib.Join, userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
if r := rateLimits.Limit(req, device); r != nil {
Implement read receipts (#1528) * fix conversion from int to string yields a string of one rune, not a string of digits * Add receipts table to syncapi * Use StreamingToken as the since value * Add required method to testEDUProducer * Make receipt json creation "easier" to read * Add receipts api to the eduserver * Add receipts endpoint * Add eduserver kafka consumer * Add missing kafka config * Add passing tests to whitelist Signed-off-by: Till Faelligen <tfaelligen@gmail.com> * Fix copy & paste error * Fix column count error * Make outbound federation receipts pass * Make "Inbound federation rejects receipts from wrong remote" pass * Don't use errors package * - Add TODO for batching requests - Rename variable * Return a better error message * - Use OutputReceiptEvent instead of InputReceiptEvent as result - Don't use the errors package for errors - Defer CloseAndLogIfError to close rows - Fix Copyright * Better creation/usage of JoinResponse * Query all joined rooms instead of just one * Update gomatrixserverlib * Add sqlite3 migration * Add postgres migration * Ensure required sequence exists before running migrations * Clarification on comment * - Fix a bug when creating client receipts - Use concrete types instead of interface{} * Remove dead code Use key for timestamp * Fix postgres query... * Remove single purpose struct * Use key/value directly * Only apply receipts on initial sync or if edu positions differ, otherwise we'll be sending the same receipts over and over again. * Actually update the id, so it is correctly send in syncs * Set receipt on request to /read_markers * Fix issue with receipts getting overwritten * Use fmt.Errorf instead of pkg/errors * Revert "Add postgres migration" This reverts commit 722fe5a04628882b787d096942459961db159b06. * Revert "Add sqlite3 migration" This reverts commit d113b03f6495a4b8f8bcf158a3d00b510b4240cc. * Fix selectRoomReceipts query * Make golangci-lint happy Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-11-09 18:46:11 +00:00
return *r
}
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SetReceipt(req, syncProducer, device, vars["roomId"], vars["receiptType"], vars["eventId"])
Implement read receipts (#1528) * fix conversion from int to string yields a string of one rune, not a string of digits * Add receipts table to syncapi * Use StreamingToken as the since value * Add required method to testEDUProducer * Make receipt json creation "easier" to read * Add receipts api to the eduserver * Add receipts endpoint * Add eduserver kafka consumer * Add missing kafka config * Add passing tests to whitelist Signed-off-by: Till Faelligen <tfaelligen@gmail.com> * Fix copy & paste error * Fix column count error * Make outbound federation receipts pass * Make "Inbound federation rejects receipts from wrong remote" pass * Don't use errors package * - Add TODO for batching requests - Rename variable * Return a better error message * - Use OutputReceiptEvent instead of InputReceiptEvent as result - Don't use the errors package for errors - Defer CloseAndLogIfError to close rows - Fix Copyright * Better creation/usage of JoinResponse * Query all joined rooms instead of just one * Update gomatrixserverlib * Add sqlite3 migration * Add postgres migration * Ensure required sequence exists before running migrations * Clarification on comment * - Fix a bug when creating client receipts - Use concrete types instead of interface{} * Remove dead code Use key for timestamp * Fix postgres query... * Remove single purpose struct * Use key/value directly * Only apply receipts on initial sync or if edu positions differ, otherwise we'll be sending the same receipts over and over again. * Actually update the id, so it is correctly send in syncs * Set receipt on request to /read_markers * Fix issue with receipts getting overwritten * Use fmt.Errorf instead of pkg/errors * Revert "Add postgres migration" This reverts commit 722fe5a04628882b787d096942459961db159b06. * Revert "Add sqlite3 migration" This reverts commit d113b03f6495a4b8f8bcf158a3d00b510b4240cc. * Fix selectRoomReceipts query * Make golangci-lint happy Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
2020-11-09 18:46:11 +00:00
}),
).Methods(http.MethodPost, http.MethodOptions)
v3mux.Handle("/presence/{userId}/status",
httputil.MakeAuthAPI("set_presence", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return SetPresence(req, cfg, device, syncProducer, vars["userId"])
}),
).Methods(http.MethodPut, http.MethodOptions)
v3mux.Handle("/presence/{userId}/status",
httputil.MakeAuthAPI("get_presence", userAPI, func(req *http.Request, device *userapi.Device) util.JSONResponse {
vars, err := httputil.URLDecodeMapValues(mux.Vars(req))
if err != nil {
return util.ErrorResponse(err)
}
return GetPresence(req, device, natsClient, cfg.Matrix.JetStream.Prefixed(jetstream.RequestPresence), vars["userId"])
}),
).Methods(http.MethodGet, http.MethodOptions)
}