Doesn't buy us much, but makes everything a bit more consistent.
Also removes the SQL trace driver, as it is unused and the output is
hard to read anyway.
Preparations to actually remove/replace `BaseDendrite`.
Quite a few changes:
- SyncAPI accepts an `fulltext.Indexer` interface (fulltext is removed
from `BaseDendrite`)
- Caches are removed from `BaseDendrite`
- Introduces a `Router` struct (likely to change)
- also fixes#2903
- Introduces a `sqlutil.ConnectionManager`, which should remove
`base.DatabaseConnection` later on
- probably more
This should deflake UTs and be more correct in terms of getting
`Events`.
`Events` tries to fetch the event from the cache first and may get an
unredacted event from it, while it should already be redacted.
This also fixes an issue regarding updates to relations for invalid
events, which could result in us retrying said event over and over
again, if we fail to unmarshal the event to
`gomatrixserverlib.RelationContent`, this was discovered by
`@sleroq:virto.community`
Table name has changed since instructions were written.
There's probably a better way to describe how to get the internal room
ID than I've attempted here, so feel free to adjust as needed. (It may
even be good to show an example of what an internal room ID looks like,
e.g. `!nc93825:example.com`)
### Pull Request Checklist
* [x] I have added Go unit tests or [Complement integration
tests](https://github.com/matrix-org/complement) for this PR _or_ I have
justified why this PR doesn't need tests
* Doc-only change
* [x] Pull request includes a [sign off below using a legally
identifiable
name](https://matrix-org.github.io/dendrite/development/contributing#sign-off)
Signed-off-by: `Tim McCormack <cortex@brainonfire.net>`
---------
Co-authored-by: Till <2353100+S7evinK@users.noreply.github.com>
We need to check the redaction PL in Dendrite, if we do it in GMSL, we
end up not sending the event to the output stream because it will be
rejected.
---------
Co-authored-by: kegsay <kegan@matrix.org>
Currently, the documentation makes use of the old names for the binary
and configuration files. This updates the documentation so that users
can follow the guide without issues again.
These changes don't require any go unit tests because it does not modify
any golang code.
Signed-off-by: `Robin Westerik <gh@westerik.me>`
This PR changes the following:
- `StoreEvent` now only stores an event (and possibly prev event),
instead of also doing redactions
- Adds a `MaybeRedactEvent` (pulled out from `StoreEvent`), which should
be called after storing events
- a few other things
### Pull Request Checklist
<!-- Please read
https://matrix-org.github.io/dendrite/development/contributing before
submitting your pull request -->
* [x] I have added Go unit tests or [Complement integration
tests](https://github.com/matrix-org/complement) for this PR _or_ I have
justified why this PR doesn't need tests
* [x] Pull request includes a [sign off below using a legally
identifiable
name](https://matrix-org.github.io/dendrite/development/contributing#sign-off)
_or_ I have already signed off privately
---
I do not know, how you run helm-docs ....
otherwise i would like to add somewhere:
````markdown
* Works well with [Prometheus Operator](https://prometheus-operator.dev/) ([Helmchart](https://artifacthub.io/packages/helm/prometheus-community/kube-prometheus-stack)) and there setup of [Grafana](https://grafana.com/grafana/), by enabling following values:
```yaml
prometheus:
servicemonitor:
enabled: true
labels:
release: "kube-prometheus-stack"
rules:
enabled: true # will deploy alert rules
additionalLabels:
release: "kube-prometheus-stack"
grafana:
dashboards:
enabled: true # will deploy default dashboards
```
PS: The labels `release=kube-prometheus-stack` is setup with the helmchart of the Prometheus Operator. For Grafana Dashboards it maybe need scan enable to scan in correct namespaces (or ALL), enabled by `sidecar.dashboards.searchNamespace` in [Helmchart of grafana](https://artifacthub.io/packages/helm/grafana/grafana) (which is part of PrometheusOperator, so `grafana.sidecar.dashboards.searchNamespace`)
````
Maybe also put somewhere the Screenshot of that Grafana Dashboard:
https://grafana.com/grafana/dashboards/13916-dendrite/
---
@S7evinK do you take a look?
Signed-off-by: genofire <geno+dev@fireorbit.de>
This PR changes a few things:
- It pulls out the creation of several NIDs from the `StoreEvent`
function to make the functions more reusable
- Uses more caching when using those NIDs to avoid DB round trips
I guess tests for the logging is rather unusual so I omitted tests for
this change.
* [x] I have added Go unit tests or [Complement integration
tests](https://github.com/matrix-org/complement) for this PR _or_ I have
justified why this PR doesn't need tests
* [x] Pull request includes a [sign off below using a legally
identifiable
name](https://matrix-org.github.io/dendrite/development/contributing#sign-off)
_or_ I have already signed off privately
Signed-off-by: `David Schneider <dsbrng25b@gmail.com>`
---------
Signed-off-by: David Schneider <dsbrng25b@gmail.com>
Bumps [golang.org/x/net](https://github.com/golang/net) from 0.5.0 to
0.7.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="8e2b117aee"><code>8e2b117</code></a>
http2/hpack: avoid quadratic complexity in hpack decoding</li>
<li><a
href="547e7edf38"><code>547e7ed</code></a>
http2: avoid referencing ResponseWrite.Write parameter after
returning</li>
<li><a
href="39940adcaa"><code>39940ad</code></a>
html: parse comments per HTML spec</li>
<li><a
href="87ce33ecb4"><code>87ce33e</code></a>
go.mod: update golang.org/x dependencies</li>
<li><a
href="415cb6d518"><code>415cb6d</code></a>
all: fix some comments</li>
<li><a
href="7e3c19ca52"><code>7e3c19c</code></a>
all: correct typos in comments</li>
<li><a
href="296f09aa38"><code>296f09a</code></a>
http2: case insensitive handling for 100-continue</li>
<li><a
href="f8411da775"><code>f8411da</code></a>
nettest: fix tests on dragonfly and js/wasm</li>
<li>See full diff in <a
href="https://github.com/golang/net/compare/v0.5.0...v0.7.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
- `@dependabot use these labels` will set the current labels as the
default for future PRs for this repo and language
- `@dependabot use these reviewers` will set the current reviewers as
the default for future PRs for this repo and language
- `@dependabot use these assignees` will set the current assignees as
the default for future PRs for this repo and language
- `@dependabot use this milestone` will set the current milestone as the
default for future PRs for this repo and language
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/matrix-org/dendrite/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [golang.org/x/image](https://github.com/golang/image) from 0.1.0
to 0.5.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="e6c2a4cdd5"><code>e6c2a4c</code></a>
tiff: don't pre-allocate giant slices before reading</li>
<li><a
href="3db422c472"><code>3db422c</code></a>
go.mod: update golang.org/x dependencies</li>
<li><a
href="bb712eb67b"><code>bb712eb</code></a>
go.mod: update golang.org/x dependencies</li>
<li><a
href="9b8a3be425"><code>9b8a3be</code></a>
font/plan9font: limit the font image's dimensions</li>
<li><a
href="c5235ae222"><code>c5235ae</code></a>
font/plan9font: fix byteoffset for non-zero origin</li>
<li><a
href="0888fdd524"><code>0888fdd</code></a>
font/plan9font: fix bounds overflow</li>
<li><a
href="9fdfde75ec"><code>9fdfde7</code></a>
go.mod: update golang.org/x dependencies</li>
<li>See full diff in <a
href="https://github.com/golang/image/compare/v0.1.0...v0.5.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
- `@dependabot use these labels` will set the current labels as the
default for future PRs for this repo and language
- `@dependabot use these reviewers` will set the current reviewers as
the default for future PRs for this repo and language
- `@dependabot use these assignees` will set the current assignees as
the default for future PRs for this repo and language
- `@dependabot use this milestone` will set the current milestone as the
default for future PRs for this repo and language
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/matrix-org/dendrite/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
This fixes an issue with device_id/session_ids.
If a `device_id` is reused, we would reuse the same `session_id`, since
we delete one device and insert a new one directly, resulting in the
query to get a new `session_id` to return the previous session_id.
(`SELECT count(access_token)`)
This removes most of the code used for polylith/API mode.
This removes the `/api` internal endpoints entirely.
Binary size change roughly 5%:
```
51437560 Feb 13 10:15 dendrite-monolith-server # old
48759008 Feb 13 10:15 dendrite-monolith-server # new
```
Should fix the following issues or make a lot less worse when using
Postgres:
The main issue behind #2911: The client gives up after a certain time,
causing a cascade of context errors, because the response couldn't be
built up fast enough. This mostly happens on accounts with many rooms,
due to the inefficient way we're getting recent events and current state
For #2777: The queries for getting the membership events for history
visibility were being executed for each room (I think 185?), resulting
in a whooping 2k queries for membership events. (Getting the
statesnapshot -> block nids -> actual wanted membership event)
Both should now be better by:
- Using a LATERAL join to get all recent events for all joined rooms in
one go (TODO: maybe do the same for room summary and current state etc)
- If we're lazy loading on initial syncs, we're now not getting the
whole current state, just to drop the majority of it because we're lazy
loading members - we add a filter to exclude membership events on the
first call to `CurrentState`.
- Using an optimized query to get the membership events needed to
calculate history visibility
---------
Co-authored-by: kegsay <kegan@matrix.org>
