* Add Pushserver component with Pushers API
Co-authored-by: Tommie Gannert <tommie@gannert.se>
Co-authored-by: Dan Peleg <dan@globekeeper.com>
* Wire Pushserver component
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Add PushGatewayClient.
The full event format is required for Sytest.
* Add a pushrules module.
* Change user API account creation to use the new pushrules module's defaults.
Introduces "scope" as required by client API, and some small field
tweaks to make some 61push Sytests pass.
* Add push rules query/put API in Pushserver.
This manipulates account data over User API, and fires sync messages
for changes. Those sync messages should, according to an existing TODO
in clientapi, be moved to userapi.
Forks clientapi/producers/syncapi.go to pushserver/ for later extension.
* Add clientapi routes for push rules to Pushserver.
A cleanup would be to move more of the name-splitting logic into
pushrules.go, to depollute routing.go.
* Output rooms.join.unread_notifications in /sync.
This is the read-side. Pushserver will be the write-side.
* Implement pushserver/storage for notifications.
* Use PushGatewayClient and the pushrules module in Pushserver's room consumer.
* Use one goroutine per user to avoid locking up the entire server for
one bad push gateway.
* Split pushing by format.
* Send one device per push. Sytest does not support coalescing
multiple devices into one push. Matches Synapse. Either we change
Sytest, or remove the group-by-url-and-format logic.
* Write OutputNotificationData from push server. Sync API is already
the consumer.
* Implement read receipt consumers in Pushserver.
Supports m.read and m.fully_read receipts.
* Add clientapi route for /unstable/notifications.
* Rename to UpsertPusher for clarity and handle pusher update
* Fix linter errors
* Ignore body.Close() error check
* Fix push server internal http wiring
* Add 40 newly passing 61push tests to whitelist
* Add next 12 newly passing 61push tests to whitelist
* Send notification data before notifying users in EDU server consumer
* NATS JetStream
* Goodbye sarama
* Fix `NewStreamTokenFromString`
* Consume on the correct topic for the roomserver
* Don't panic, NAK instead
* Move push notifications into the User API
* Don't set null values since that apparently causes Element upsetti
* Also set omitempty on conditions
* Fix bug so that we don't override the push rules unnecessarily
* Tweak defaults
* Update defaults
* More tweaks
* Move `/notifications` onto `r0`/`v3` mux
* User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly
Co-authored-by: Piotr Kozimor <p1996k@gmail.com>
Co-authored-by: Tommie Gannert <tommie@gannert.se>
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Merge user API databases into one
* Remove DeviceDatabase from config
* Fix tests
* Try that again
* Clean up keyserver device keys when the devices no longer exist in the user API
* Tweak ordering
* Fix UserExists flag, device check
* Allow including empty entries so we can clean them up
* Remove logging
* Add account_type for sqlite3
* Add account_type for postgres
* Remove CreateGuestAccount from interface
* Add new AccountTypes & update test
* Use newly added AccountType for account creation
* Add migrations
* Reuse type
* Add AccounnType to Device, so it can be verified on requests
* Rename migration, add missing update for appservices
* Rename sqlite3 migration
* Add missing AccountType to return value
* Update sqlite migration
Change allowance check on /admin/whois
* Fix migration, add IS NULL
* Move accountType to completeRegistration
* Fix migrations
* Add passing test
* Delete device keys/signatures from key server when deleting device from user API
* Move loop to within database transaction
* Don't fall over deleting no rows
* Add PUT key backup endpoints and glue them to PerformKeyBackup
* Add tables for storing backup keys and glue them into the user API
* Don't create tables whilst still WIPing
* writer on sqlite please
* Linting
* Implement OpenID module (#599)
- Unrelated: change Riot references to Element in client API routing
Signed-off-by: Bruce MacDonald <contact@bruce-macdonald.com>
* OpenID module tweaks (#599)
- specify expiry is ms rather than vague ts
- add OpenID token lifetime to configuration
- use Go naming conventions for the path params
- store plaintext token rather than hash
- remove openid table sqllite mutex
* Add default OpenID token lifetime (#599)
* Update dendrite-config.yaml
Co-authored-by: Kegsay <kegsay@gmail.com>
Co-authored-by: Kegsay <kegan@matrix.org>
* Check membership of room
* Use QueryStateAfterEventsResponse
* Fix complexity
* Changes that I made a long time ago
* Rename to appserviceJoinedAtEvent
* Check membership in GetMemberships
* Update QueryMembershipsForRoom
* Tweaks in client API
* Update appserviceJoinedAtEvent
* Comments
* Try QueryMembershipForUser instead
* Undo some changes to client API that shouldn't be needed
* More /event tweaks
* Refactor /event bit
* Go back to QueryMembershipsForRoom because appservices are hard
* Fix bugs in onMessage
* Add comments
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Always return OTK counts
* Fix parameter ordering
* Send IDs over to keyserver internal API
* Review comments
* Fix syntax error
* Fix panic, hopefully
* Require user ID to be set
* Fix user API call
* Ensure appservices can auth as users in their namespaces
Currently in Dendrite appservices can only auth as a user if the user was created by said appservice. This does not align with the appservices spec which specifically says:
> The application service may specify the virtual user to act as through use of a user_id query string parameter on the request. The user specified in the query string must be covered by one of the application service’s user namespaces.
https://matrix.org/docs/spec/application_service/r0.1.2#identity-assertion
In the case that a user has been created for example via manual registration but belongs to an appservice namespace, the current functionality does not allow appservices to auth as them. This PR fixes that by replacing the appservice ID check with a check against the appservice namespace.
This also matches Synapse functionality, which I confirmed to allow appservices to auth as a user in their namespace, irregardless of how the user was registered.
* Also allow appservice itself to auth with user_id
Appservice user_id + access token check needs to work both when user_id is the appservice and when appservice has the user in their user namespace.
Signed-off-by: Jason Robinson <mail@jasonrobinson.me>
* Update last seen on sync requests
* Fix MSC2836 unit tests
* Only update once per minute
* Remove debug logging
* Configurable option
* Simplify updateLastSeen/cleanLastSeen
* User API support for password changes
* Password changes in client API
* Update sytest-whitelist
* Remove debug logging
* Default logout_devices to true
* Fix deleting devices by local part
* WIP: Eagerly sync device lists on /user/keys/query requests
Also notify servers when a user's device display name changes. Few
caveats:
- sytest `Device deletion propagates over federation` fails
- `populateResponseWithDeviceKeysFromDatabase` is called from multiple
goroutines and hence is unsafe.
* Handle deleted devices correctly over federation
* Fix New users appear in /keys/changes
* Create blank device keys when logging in on a new device
* Add PerformDeviceUpdate and fix a few bugs
- Correct device deletion query on sqlite
- Return no keys on /keys/query rather than an empty key
* Unbreak sqlite properly
* Use a real DB for currentstateserver integration tests
* Race fix
* Recheck device lists when join/leave events come in
* Add PerformDeviceDeletion
* Notify clients when devices are deleted
* Unbreak things
* Remove debug logging
* User directory
* Fix syncapi unit test
* Make user directory only show remote users you know about from your joined rooms
* Update sytest-whitelist
* Review comments
* BREAKING: Make eduserver/appservice use userapi
This is a breaking change because this PR restructures how the AS API
tracks its position in Kafka streams. Previously, it used the account DB
to store partition offsets. However, this is also being used by `clientapi`
for the same purpose, which is bad (each component needs to store offsets
independently or else you might lose messages across restarts). This PR
changes this behaviour to now store partition offsets in the `appservice`
database.
This means that:
- Upon restart, the `appservice` component will attempt to replay all
room events from the beginning of time.
- An additional table will be created in the appservice database, which
in and of itself is backwards compatible.
* Return ErrorConflict
* Make userapi responsible for checking access tokens
There's still plenty of dependencies on account/device DBs, but this
is a start. This is a breaking change as it adds a required config
value `listen.user_api`.
* Cleanup
* Review comments and test fix
