* Generic-based internal HTTP API (tested out on a few endpoints in the federation API)
* Add `PerformInvite`
* More tweaks
* Fix metric name
* Fix LookupStateIDs
* Lots of changes to clients
* Some serverside stuff
* Some error handling
* Use paths as metric names
* Revert "Use paths as metric names"
This reverts commit a9323a6a343f5ce6461a2e5bd570fe06465f1b15.
* Namespace metric names
* Remove duplicate entry
* Remove another duplicate entry
* Tweak error handling
* Some more tweaks
* Update error behaviour
* Some more error tweaking
* Fix API path for `PerformDeleteKeys`
* Fix another path
* Tweak federation client proxying
* Fix another path
* Don't return typed nils
* Some more tweaks, not that it makes any difference
* Tweak federation client proxying
* Maybe fix the key backup test
* Add `evacuateUser` endpoint, use it when deactivating accounts
* Populate the API
* Clean up user devices when deactivating
* Include invites, delete pushers
* Check state before event
* Tweaks
* Refactor a bit, include in output events
* Don't waste time if soft failed either
* Tweak control flow, comments, use GMSL history visibility type
* Rate limiting changes
This makes the following changes:
* For logged in users, the rate limiting now applies to the device session rather than the remote IP address;
* For non-logged in users, the rate limiting continues to apply to remote address as it does today;
* It is now possible to add user IDs to the `exempt_user_ids` option under `rate_limiting` to exclude bots from rate limiting;
* Admin and appservice users are now exempt from rate limiting by default.
* Fix build with media API
* tidy up interfaces
* remove unused GetCreatorIDForAlias
* Add RoomserverUserAPI interface
* Define more interfaces
* Use AppServiceInternalAPI for consistent naming
* clean up federationapi constructor a bit
* Fix monolith in -http mode
* Specify interfaces used by appservice, do half of clientapi
* convert more deps of clientapi to finer-grained interfaces
* Convert mediaapi and rest of clientapi
* Somehow this got missed
* Add new endpoint to allow admins to evacuate the local server from the room
* Guard endpoint
* Use right prefix
* Auth API
* More useful return error rather than a panic
* More useful return value again
* Update the path
* Try using inputer instead
* oh provide the config
* Try that again
* Return affected user IDs
* Don't create so many forward extremities
* Add missing `Path` to name
Co-authored-by: Till <2353100+S7evinK@users.noreply.github.com>
* Add response size and requests total to internal handler
* Move MustRegister calls to New* funcs
* Move MustRegister back to init
* Init at some place, minimize changes
* Add ignore users
* Ignore users in pushrules
Add passing tests
* Update sytest lists
* Store ignore knowledge in the sync API
* Fix copyrights
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Added /upgrade endpoint
* fix
* Fix lints
* More lint lifex
* Move room upgrading to the roomserver
* Remove extraneous arg
* Fix HTTP API for `PerformUpgrade`
* Reduce number of API calls in `generateInitialEvents`, preserve membership fields
* Refactor `generateInitialEvents` to preserve old state events for all but the essential room setup events
* Handle ban events in the state transfer
* Refactor and comment `createTemporaryPowerLevels`
* Only send two power levels if we needed to override the levels, preserve miscellaneous fields in the create event
* Fix copyrights
* Review comments @S7evinK
* Update sytest whitelist
* Specify empty state keys, use `EventLevel`, remove unnecessary check on state copy
* Add comment to `restrictOldRoomPowerLevels`
* Ensure canonical aliases exist before clearing
* Copy invites as well as bans
* Fix return error on `m.room.tombstone` handling in client API
* Relax checks for well-formedness of join rules, membership event etc
Co-authored-by: Alex Kursell <alex@awk.run>
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
Co-authored-by: kegsay <kegan@matrix.org>
* Move receipt sending to own JetStream producer
* Move SendToDevice to producer
* Remove most parts of the EDU server
* Fix SendToDevice & copyrights
* Move structs, cleanup EDU Server traces
* Use HeadersOnly subscription
* Missing file
* Fix linter issues
* Move consumers to own files
* Rename durable consumer; Consumer cleanup
* Docs/config cleanup
* Allow stored session parameters to be overwritten in the registration request
* Remove logging
* Close request body
* Use `httputil.UnmarshalJSON` as that should enforce UTF-8 correctness
* Return `M_NOT_JSON` on read error
* Whoops, return the value of `httputil.UnmarshalJSON`
* Remove redundant comment
* Refactor user api internal
* Refactor clientapi to use internal userapi
* Use internal userapi instead of user DB directly
* Remove AccountDB dependency
* Fix linter issues
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Add canonical support
* Add test
* Check that the send event is actually an m.room.canonical_alias
Check that we got an event from the database
* Update to get correct required events
* Add flakey test to blacklist
* Add Pushserver component with Pushers API
Co-authored-by: Tommie Gannert <tommie@gannert.se>
Co-authored-by: Dan Peleg <dan@globekeeper.com>
* Wire Pushserver component
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Add PushGatewayClient.
The full event format is required for Sytest.
* Add a pushrules module.
* Change user API account creation to use the new pushrules module's defaults.
Introduces "scope" as required by client API, and some small field
tweaks to make some 61push Sytests pass.
* Add push rules query/put API in Pushserver.
This manipulates account data over User API, and fires sync messages
for changes. Those sync messages should, according to an existing TODO
in clientapi, be moved to userapi.
Forks clientapi/producers/syncapi.go to pushserver/ for later extension.
* Add clientapi routes for push rules to Pushserver.
A cleanup would be to move more of the name-splitting logic into
pushrules.go, to depollute routing.go.
* Output rooms.join.unread_notifications in /sync.
This is the read-side. Pushserver will be the write-side.
* Implement pushserver/storage for notifications.
* Use PushGatewayClient and the pushrules module in Pushserver's room consumer.
* Use one goroutine per user to avoid locking up the entire server for
one bad push gateway.
* Split pushing by format.
* Send one device per push. Sytest does not support coalescing
multiple devices into one push. Matches Synapse. Either we change
Sytest, or remove the group-by-url-and-format logic.
* Write OutputNotificationData from push server. Sync API is already
the consumer.
* Implement read receipt consumers in Pushserver.
Supports m.read and m.fully_read receipts.
* Add clientapi route for /unstable/notifications.
* Rename to UpsertPusher for clarity and handle pusher update
* Fix linter errors
* Ignore body.Close() error check
* Fix push server internal http wiring
* Add 40 newly passing 61push tests to whitelist
* Add next 12 newly passing 61push tests to whitelist
* Send notification data before notifying users in EDU server consumer
* NATS JetStream
* Goodbye sarama
* Fix `NewStreamTokenFromString`
* Consume on the correct topic for the roomserver
* Don't panic, NAK instead
* Move push notifications into the User API
* Don't set null values since that apparently causes Element upsetti
* Also set omitempty on conditions
* Fix bug so that we don't override the push rules unnecessarily
* Tweak defaults
* Update defaults
* More tweaks
* Move `/notifications` onto `r0`/`v3` mux
* User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly
Co-authored-by: Piotr Kozimor <p1996k@gmail.com>
Co-authored-by: Tommie Gannert <tommie@gannert.se>
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Only allow device deletion if the session matches
* Make the challenge response available to other packages
* Remove userID, as it's not in the spec
* Remove tests
* Add passing test & remove obsolete config
* Rename field, add comment
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Remember parameters for sessions
Cleanup sessions on successfully registering or after a while
* Add flakey test
* Update to use time.AfterFunc, add more tests
* Try to drain the channel, if possible
* Add server_notices config
* Disallow rejecting "server notice" invites
* Update config
* Slightly refactor sendEvent and CreateRoom so it can be reused
* Implement unspecced server notices
* Validate the request
* Set the user api when starting
* Rename function/variables
* Update comments
* Update config
* Set the avatar on account creation
* Update test
* Only create the account when starting
Only add routes if sever notices are enabled
* Use reserver username
Check that we actually got roomData
* Add check for admin account
Enable server notices for CI
Return same values as Synapse
* Add custom error for rejecting server notice invite
* Move building an invite to it's own function, for reusability
* Don't create new rooms, use the existing one (follow Synapse behavior)
Co-authored-by: kegsay <kegan@matrix.org>
* Merge user API databases into one
* Remove DeviceDatabase from config
* Fix tests
* Try that again
* Clean up keyserver device keys when the devices no longer exist in the user API
* Tweak ordering
* Fix UserExists flag, device check
* Allow including empty entries so we can clean them up
* Remove logging
* Listen for /v3 on CSAPI
* Docs
* More docs
* Rename path variable to fix key backup tests
* Update routing.go
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Add account_type for sqlite3
* Add account_type for postgres
* Remove CreateGuestAccount from interface
* Add new AccountTypes & update test
* Use newly added AccountType for account creation
* Add migrations
* Reuse type
* Add AccounnType to Device, so it can be verified on requests
* Rename migration, add missing update for appservices
* Rename sqlite3 migration
* Add missing AccountType to return value
* Update sqlite migration
Change allowance check on /admin/whois
* Fix migration, add IS NULL
* Move accountType to completeRegistration
* Fix migrations
* Add passing test
* Add GOPATH to PATH in find-lint.sh.
The user doesn't necessarily have it in PATH.
* Refactor LoginTypePassword and Type to support m.login.token and m.login.sso.
For login token:
* m.login.token will require deleting the token after completeAuth has
generated an access token, so a cleanup function is returned by
Type.Login.
* Allowing different login types will require parsing the /login body
twice: first to extract the "type" and then the type-specific parsing.
Thus, we will have to buffer the request JSON in /login, like
UserInteractive already does.
For SSO:
* NewUserInteractive will have to also use GetAccountByLocalpart. It
makes more sense to just pass a (narrowed-down) accountDB interface
to it than adding more function pointers.
Code quality:
* Passing around (and down-casting) interface{} for login request types
has drawbacks in terms of type-safety, and no inherent benefits. We
always decode JSON anyway. Hence renaming to Type.LoginFromJSON. Code
that directly uses LoginTypePassword with parsed data can still use
Login.
* Removed a TODO for SSO. This is already tracked in #1297.
* httputil.UnmarshalJSON is useful because it returns a JSONResponse.
This change is intended to have no functional changes.
* Support login tokens in User API.
This adds full lifecycle functions for login tokens: create, query, delete.
* Support m.login.token in /login.
* Fixes for PR review.
* Set @matrix-org/dendrite-core as repository code owner
* Return event NID from `StoreEvent`, match PSQL vs SQLite behaviour, tweak backfill persistence (#2071)
Co-authored-by: kegsay <kegan@matrix.org>
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
