Fixes a variety of issues where clients were receiving pseudoIDs in
places that should be userIDs.
This change makes pseudoIDs work with sliding sync & element x.
---------
Co-authored-by: Till <2353100+S7evinK@users.noreply.github.com>
There are cases where a dendrite instance is unaware of a pseudo ID for
a user, the user is not a member of that room. To represent this case,
we currently use the 'zero' value, which is often not checked and so
causes errors later down the line. To make this case more explict, and
to be consistent with `QueryUserIDForSender`, this PR changes this to
use a pointer (and `nil` to mean no sender ID).
Signed-off-by: `Sam Wedgwood <sam@wedgwood.dev>`
The previous version was getting **ALL** membership events (as
`ClientEvents`, so going through `NewEventFromTrustedJSONWithID`) for a
given room.
Now we are querying only locally joined users as `ClientEvents`, which
should **significantly** reduce allocations.
Take for example a large room with 2k membership events, but only 1
local user - avoiding 1999 `NewEventFromTrustedJSONWithID` calls just to
calculate the `roomSize` which we can also query by other means.
This is also getting called for every `OutputRoomEvent` in the userAPI.
Benchmark with 1 local user and 100 remote users.
```
pkg: github.com/matrix-org/dendrite/userapi/consumers
cpu: 12th Gen Intel(R) Core(TM) i5-12500H
│ old.txt │ new.txt │
│ sec/op │ sec/op vs base │
LocalRoomMembers-16 375.9µ ± 7% 327.6µ ± 6% -12.85% (p=0.000 n=10)
│ old.txt │ new.txt │
│ B/op │ B/op vs base │
LocalRoomMembers-16 79.426Ki ± 0% 8.507Ki ± 0% -89.29% (p=0.000 n=10)
│ old.txt │ new.txt │
│ allocs/op │ allocs/op vs base │
LocalRoomMembers-16 1015.0 ± 0% 277.0 ± 0% -72.71% (p=0.000 n=10)
```
Requires https://github.com/matrix-org/gomatrixserverlib/pull/376
This has numerous upsides:
- Less type casting to `*Event` is required.
- Making Dendrite work with `PDU` interfaces means we can swap out Event
impls more easily.
- Tests which represent weird event shapes are easier to write.
Part of a series of refactors on GMSL.
Replaced with types.HeaderedEvent _for now_. In reality we want to move
them all to gmsl.Event and only use HeaderedEvent when we _need_ to
bundle the version/event ID with the event (seriailsation boundaries,
and even then only when we don't have the room version).
Requires https://github.com/matrix-org/gomatrixserverlib/pull/373
As outlined in https://github.com/matrix-org/gomatrixserverlib/pull/368
The main change Dendrite side is that `RoomVersion` no longer has any
methods on it. Instead, you need to bounce via `gmsl.GetRoomVersion`.
It's very interesting to see where exactly Dendrite cares about this.
For some places it's creating events (fine) but others are way more
specific. Those areas will need to migrate to GMSL at some point.
Preparations to actually remove/replace `BaseDendrite`.
Quite a few changes:
- SyncAPI accepts an `fulltext.Indexer` interface (fulltext is removed
from `BaseDendrite`)
- Caches are removed from `BaseDendrite`
- Introduces a `Router` struct (likely to change)
- also fixes#2903
- Introduces a `sqlutil.ConnectionManager`, which should remove
`base.DatabaseConnection` later on
- probably more
Fixes#2863 and makes
```
/upgrade preserves direct room state
local user has tags copied to the new room
remote user has tags copied to the new room
```
pass.
This PR changes the handling of notifications
- removes the `StreamEvent` and `ReadUpdate` stream
- listens on the `OutputRoomEvent` stream in the UserAPI to inform the
SyncAPI about unread notifications
- listens on the `OutputReceiptEvent` stream in the UserAPI to set
receipts/update notifications
- sets the `read_markers` directly from within the internal UserAPI
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
This PR
- adds tests for `evaluatePushrules`
- removes the need for the UserAPI on the `OutputStreamEventConsumer`
(for easier testing)
- adds a method to get the pushrules from the database
- adds a new default pushrule for `m.reaction` events (and some other
tweaks)
* Add ignore users
* Ignore users in pushrules
Add passing tests
* Update sytest lists
* Store ignore knowledge in the sync API
* Fix copyrights
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Roomserver input refactoring — again!
* Ensure the actor runs again
* Preserve consumer after unsubscribe
* Another sprinkling of magic
* Rename `TopicFor` to `Prefixed`
* Recreate the stream if the config is bad
* Check streams too
* Prefix subjects, preserve inboxes
* Recreate if subjects wrong
* Remove stream subject
* Reconstruct properly
* Fix mutex unlock
* Comments
* Fix tests
* Don't drop events
* Review comments
* Separate `queueInputRoomEvents` function
* Re-jig control flow a bit
* Clean old notifications regularly
We'll keep highlights for a month and non-highlights for a day, to stop the `userapi_notifications` table from growing indefinitely.
We'll also allow storing events even if no pushers are present, because apparently Element Web expects to work that way.
* Fix the milliseconds
* Use process context
* Update sytest lists
* Fix build issue
* Add Pushserver component with Pushers API
Co-authored-by: Tommie Gannert <tommie@gannert.se>
Co-authored-by: Dan Peleg <dan@globekeeper.com>
* Wire Pushserver component
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Add PushGatewayClient.
The full event format is required for Sytest.
* Add a pushrules module.
* Change user API account creation to use the new pushrules module's defaults.
Introduces "scope" as required by client API, and some small field
tweaks to make some 61push Sytests pass.
* Add push rules query/put API in Pushserver.
This manipulates account data over User API, and fires sync messages
for changes. Those sync messages should, according to an existing TODO
in clientapi, be moved to userapi.
Forks clientapi/producers/syncapi.go to pushserver/ for later extension.
* Add clientapi routes for push rules to Pushserver.
A cleanup would be to move more of the name-splitting logic into
pushrules.go, to depollute routing.go.
* Output rooms.join.unread_notifications in /sync.
This is the read-side. Pushserver will be the write-side.
* Implement pushserver/storage for notifications.
* Use PushGatewayClient and the pushrules module in Pushserver's room consumer.
* Use one goroutine per user to avoid locking up the entire server for
one bad push gateway.
* Split pushing by format.
* Send one device per push. Sytest does not support coalescing
multiple devices into one push. Matches Synapse. Either we change
Sytest, or remove the group-by-url-and-format logic.
* Write OutputNotificationData from push server. Sync API is already
the consumer.
* Implement read receipt consumers in Pushserver.
Supports m.read and m.fully_read receipts.
* Add clientapi route for /unstable/notifications.
* Rename to UpsertPusher for clarity and handle pusher update
* Fix linter errors
* Ignore body.Close() error check
* Fix push server internal http wiring
* Add 40 newly passing 61push tests to whitelist
* Add next 12 newly passing 61push tests to whitelist
* Send notification data before notifying users in EDU server consumer
* NATS JetStream
* Goodbye sarama
* Fix `NewStreamTokenFromString`
* Consume on the correct topic for the roomserver
* Don't panic, NAK instead
* Move push notifications into the User API
* Don't set null values since that apparently causes Element upsetti
* Also set omitempty on conditions
* Fix bug so that we don't override the push rules unnecessarily
* Tweak defaults
* Update defaults
* More tweaks
* Move `/notifications` onto `r0`/`v3` mux
* User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly
Co-authored-by: Piotr Kozimor <p1996k@gmail.com>
Co-authored-by: Tommie Gannert <tommie@gannert.se>
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
