dendrite/dendrite-config.yaml

# This is the Dendrite configuration file.
#
# The configuration is split up into sections - each Dendrite component has a
# configuration section, in addition to the "global" section which applies to
# all components.
#
# At a minimum, to get started, you will need to update the settings in the
# "global" section for your deployment, and you will need to check that the
# database "connection_string" line in each component section is correct. 
#
# Each component with a "database" section can accept the following formats
# for "connection_string":
#   SQLite:     file:filename.db
#               file:///path/to/filename.db
#   PostgreSQL: postgresql://user:pass@hostname/database?params=...
#
# SQLite is embedded into Dendrite and therefore no further prerequisites are
# needed for the database when using SQLite mode. However, performance with
# PostgreSQL is significantly better and recommended for multi-user deployments.
# SQLite is typically around 20-30% slower than PostgreSQL when tested with a
# small number of users and likely will perform worse still with a higher volume
# of users.
#
# The "max_open_conns" and "max_idle_conns" settings configure the maximum 
# number of open/idle database connections. The value 0 will use the database
# engine default, and a negative value will use unlimited connections. The
# "conn_max_lifetime" option controls the maximum length of time a database
# connection can be idle in seconds - a negative value is unlimited.

# The version of the configuration file. 
version: 1

# Global Matrix configuration. This configuration applies to all components.
global:
  # The domain name of this homeserver.
  server_name: localhost

  # The path to the signing private key file, used to sign requests and events.
  private_key: matrix_key.pem

  # The paths and expiry timestamps (as a UNIX timestamp in millisecond precision)
  # to old signing private keys that were formerly in use on this domain. These
  # keys will not be used for federation request or event signing, but will be
  # provided to any other homeserver that asks when trying to verify old events.
  # old_private_keys:
  # - private_key: old_matrix_key.pem
  #   expired_at: 1601024554498

  # How long a remote server can cache our server signing key before requesting it
  # again. Increasing this number will reduce the number of requests made by other
  # servers for our key but increases the period that a compromised key will be
  # considered valid by other homeservers.
  key_validity_period: 168h0m0s

  # Lists of domains that the server will trust as identity servers to verify third
  # party identifiers such as phone numbers and email addresses.
  trusted_third_party_id_servers:
  - matrix.org
  - vector.im

  # Configuration for Kafka/Naffka.
  kafka:
    # List of Kafka broker addresses to connect to. This is not needed if using
    # Naffka in monolith mode.
    addresses:
      - localhost:2181

    # The prefix to use for Kafka topic names for this homeserver. Change this only if
    # you are running more than one Dendrite homeserver on the same Kafka deployment.
    topic_prefix: Dendrite

    # Whether to use Naffka instead of Kafka. This is only available in monolith
    # mode, but means that you can run a single-process server without requiring
    # Kafka.
    use_naffka: true

    # Naffka database options. Not required when using Kafka.
    naffka_database:
      connection_string: file:naffka.db
      max_open_conns: 100
      max_idle_conns: 2
      conn_max_lifetime: -1

  # Configuration for Prometheus metric collection.
  metrics:
    # Whether or not Prometheus metrics are enabled.
    enabled: false

    # HTTP basic authentication to protect access to monitoring.
    basic_auth:
      username: metrics
      password: metrics

# Configuration for the Appservice API.
app_service_api:
  internal_api:
    listen: http://localhost:7777
    connect: http://localhost:7777
  database:
    connection_string: file:appservice.db
    max_open_conns: 100
    max_idle_conns: 2
    conn_max_lifetime: -1

  # Appservice configuration files to load into this homeserver.
  config_files: []

# Configuration for the Client API.
client_api:
  internal_api:
    listen: http://localhost:7771
    connect: http://localhost:7771
  external_api:
    listen: http://[::]:8071

  # Prevents new users from being able to register on this homeserver, except when
  # using the registration shared secret below.
  registration_disabled: false

  # If set, allows registration by anyone who knows the shared secret, regardless of
  # whether registration is otherwise disabled.
  registration_shared_secret: ""

  # Whether to require reCAPTCHA for registration.
  enable_registration_captcha: false

  # Settings for ReCAPTCHA. 
  recaptcha_public_key: ""
  recaptcha_private_key: ""
  recaptcha_bypass_secret: ""
  recaptcha_siteverify_api: ""

  # TURN server information that this homeserver should send to clients. 
  turn:
    turn_user_lifetime: ""
    turn_uris: []
    turn_shared_secret: ""
    turn_username: ""
    turn_password: ""

  # Settings for rate-limited endpoints. Rate limiting will kick in after the
  # threshold number of "slots" have been taken by requests from a specific 
  # host. Each "slot" will be released after the cooloff time in milliseconds.
  rate_limiting:
    enabled: true
    threshold: 5
    cooloff_ms: 500

# Configuration for the EDU server.
edu_server:
  internal_api:
    listen: http://localhost:7778
    connect: http://localhost:7778

# Configuration for the Federation API.
federation_api:
  internal_api:
    listen: http://localhost:7772
    connect: http://localhost:7772
  external_api:
    listen: http://[::]:8072

  # List of paths to X.509 certificates to be used by the external federation listeners.
  # These certificates will be used to calculate the TLS fingerprints and other servers
  # will expect the certificate to match these fingerprints. Certificates must be in PEM
  # format.
  federation_certificates: []

# Configuration for the Federation Sender.
federation_sender:
  internal_api:
    listen: http://localhost:7775
    connect: http://localhost:7775
  database:
    connection_string: file:federationsender.db
    max_open_conns: 100
    max_idle_conns: 2
    conn_max_lifetime: -1

  # How many times we will try to resend a failed transaction to a specific server. The
  # backoff is 2**x seconds, so 1 = 2 seconds, 2 = 4 seconds, 3 = 8 seconds etc.
  send_max_retries: 16

  # Disable the validation of TLS certificates of remote federated homeservers. Do not
  # enable this option in production as it presents a security risk!
  disable_tls_validation: false

  # Use the following proxy server for outbound federation traffic.
  proxy_outbound:
    enabled: false
    protocol: http
    host: localhost
    port: 8080

# Configuration for the Key Server (for end-to-end encryption).
key_server:
  internal_api:
    listen: http://localhost:7779
    connect: http://localhost:7779
  database:
    connection_string: file:keyserver.db
    max_open_conns: 100
    max_idle_conns: 2
    conn_max_lifetime: -1

# Configuration for the Media API.
media_api:
  internal_api:
    listen: http://localhost:7774
    connect: http://localhost:7774
  external_api:
    listen: http://[::]:8074
  database:
    connection_string: file:mediaapi.db
    max_open_conns: 100
    max_idle_conns: 2
    conn_max_lifetime: -1

  # Storage path for uploaded media. May be relative or absolute.
  base_path: ./media_store

  # The maximum allowed file size (in bytes) for media uploads to this homeserver
  # (0 = unlimited).
  max_file_size_bytes: 10485760

  # Whether to dynamically generate thumbnails if needed.
  dynamic_thumbnails: false

  # The maximum number of simultaneous thumbnail generators to run.
  max_thumbnail_generators: 10

  # A list of thumbnail sizes to be generated for media content.
  thumbnail_sizes:
  - width: 32
    height: 32
    method: crop
  - width: 96
    height: 96
    method: crop
  - width: 640
    height: 480
    method: scale

# Configuration for the Room Server.
room_server:
  internal_api:
    listen: http://localhost:7770
    connect: http://localhost:7770
  database:
    connection_string: file:roomserver.db
    max_open_conns: 100
    max_idle_conns: 2
    conn_max_lifetime: -1

# Configuration for the Server Key API (for server signing keys).
server_key_api:
  internal_api:
    listen: http://localhost:7780
    connect: http://localhost:7780
  database:
    connection_string: file:serverkeyapi.db
    max_open_conns: 100
    max_idle_conns: 2
    conn_max_lifetime: -1

  # Perspective keyservers to use as a backup when direct key fetches fail. This may
  # be required to satisfy key requests for servers that are no longer online when
  # joining some rooms.
  key_perspectives:
  - server_name: matrix.org
    keys:
    - key_id: ed25519:auto
      public_key: Noi6WqcDj0QmPxCNQqgezwTlBKrfqehY1u2FyWP9uYw
    - key_id: ed25519:a_RXGa
      public_key: l8Hft5qXKn1vfHrg3p4+W8gELQVo8N13JkluMfmn2sQ

  # This option will control whether Dendrite will prefer to look up keys directly
  # or whether it should try perspective servers first, using direct fetches as a
  # last resort.
  prefer_direct_fetch: false

# Configuration for the Sync API.
sync_api:
  internal_api:
    listen: http://localhost:7773
    connect: http://localhost:7773
  external_api:
    listen: http://[::]:8073
  database:
    connection_string: file:syncapi.db
    max_open_conns: 100
    max_idle_conns: 2
    conn_max_lifetime: -1

# Configuration for the User API.
user_api:
  internal_api:
    listen: http://localhost:7781
    connect: http://localhost:7781
  account_database:
    connection_string: file:userapi_accounts.db
    max_open_conns: 100
    max_idle_conns: 2
    conn_max_lifetime: -1
  device_database:
    connection_string: file:userapi_devices.db
    max_open_conns: 100
    max_idle_conns: 2
    conn_max_lifetime: -1

# Configuration for Opentracing.
# See https://github.com/matrix-org/dendrite/tree/master/docs/tracing for information on
# how this works and how to set it up.
tracing:
  enabled: false
  jaeger:
    serviceName: ""
    disabled: false
    rpc_metrics: false
    tags: []
    sampler: null
    reporter: null
    headers: null
    baggage_restrictions: null
    throttler: null

# Logging configuration, in addition to the standard logging that is sent to
# stdout by Dendrite.
logging:
- type: file
  level: info
  params:
    path: /var/log/dendrite